The original EIGRP specifications measured delay in 10-microsecond (μs) units and bandwidth in kilobytes per second, which did not scale well with higher-speed interfaces. Originating router is 10.34.1.4 Wide Metrics Minimum bandwidth is 1000000 Kbit Total delay is 110 microseconds
Minimum bandwidth is 1000000 Kbit Total delay is 30 microsecondsġ0.14.1.4 (GigabitEthernet0/2), from 10.14.1.4, Send flag is 0x0Ĭomposite metric is (5376/ 2816), route is Internal State is Passive, Query origin flag is 1, 1 Successor(s), FD is 3328ġ0.13.1.3 (GigabitEthernet0/1), from 10.13.1.3, Send flag is 0x0Ĭomposite metric is (3328/ 3072), route is Internal Example 2-17 EIGRP Topology for a Specific Prefix R1# show ip eigrp topology 10.4.4.0/24 ! Output omitted for brevityĮIGRP-IPv4 Topology Entry for AS(100)/ID(10.14.1.1) for 10.4.4.0/24 Each path contains the EIGRP attributes minimum bandwidth, total delay, interface reliability, load, and hop count. Notice that the output includes the successor route, any feasible successor paths, and the EIGRP state for the prefix.
If you are unsure of the EIGRP metrics, you can query the parameters for the formula directly from EIGRP’s topology table by using the command show ip eigrp topology network / prefix-length.Įxample 2-17 shows R1’s topology table output for the 10.4.4.0/24 network. Figure 2-10 EIGRP Classic Metric Formula with Default K Values
0 kommentar(er)
